Top 10 Thermoelectric Cooling Module Uxcell

0

We spent many hours on research to finding thermoelectric cooling module uxcell, reading product features, product specifications for this guide. For those of you who wish to the best thermoelectric cooling module uxcell, you should not miss this article. thermoelectric cooling module uxcell coming in a variety of types but also different price range. The following is the top 10 thermoelectric cooling module uxcell by our suggestions

709 reviews analysed

1. uxcell TEC1-04904 5V 4A Thermoelectric Cooler Module Cooling Peltier Plate

uxcell TEC1-04904 5V 4A Thermoelectric Cooler Module Cooling Peltier Plate

Feature

Description

Features: Square Ceramic Cooling Module, 2 Wire Terminal, Thermoelectric Cooler Module.
It is widely used in water dispenser, car fridge or other cooling devices.
Great replacement thermoelectric cooler module for your old damaged one.

2. uxcell Square Ceramic Board TEC1-12705 Model Thermoelectric Cooling Modules

uxcell Square Ceramic Board TEC1-12705 Model Thermoelectric Cooling Modules

Feature

Description

Components are widely used in refrigeration temperature of the laboratory equipment consumer products and industrial areas.
Consmer products : CPU picnic cooler drinks wine fridge refrigerators, cold water on aircraft ,portable changes in temperature cartons. ice hot water dispensers, rising damp plane.
Missile Space Applications inertial guidance system, and an infrared detector. prospective sources .semiconductor laster.
Test-tube condensers. cold cap Half Conductor physical slice.
Laboratory and scientific instruments. to win machines Dew point device. etc.

3. uxcell TEC1-12704 12V 30W Heatsink Thermoelectric Cooling Plate Module

uxcell TEC1-12704 12V 30W Heatsink Thermoelectric Cooling Plate Module

Feature

Description

Connected to a 5.78-volt power supply the cell will have a temperature differential between the two sides of about 65C (149F). 
Note: Do not connect the cell to a power supply for more than a few seconds without a heat-sink on the hot side otherwise there will be internal overheating and destruction of the Peltier cell. 

4. TEC1-12706 12V 65W Heatsink Thermoelectric Cooling Plate Module

TEC1-12706 12V 65W Heatsink Thermoelectric Cooling Plate Module

Feature

Description

  • Connected to a 12-volt power supply the cell will have a temperature differential between the two sides of about 65C (149F).
  • Note: Do not connect the cell to a power supply for more than a few seconds without a heat-sink on the hot side otherwise there will be internal overheating and destruction of the Peltier cell.

5. TEC1-12709 12V 80W Heatsink Thermoelectric Cooling Plate Module

TEC1-12709 12V 80W Heatsink Thermoelectric Cooling Plate Module

Feature

Description

  • Connected to a 12-volt power supply the cell will have a temperature differential between the two sides of about 65C (149F).
  • Note: do not connect the cell to a power supply for more than a few seconds without a heat-sink on the hot side otherwise there will be internal overheating and destruction of the Peltier cell.

6. uxcell Aluminum Water Liquid Block Thermoelectric Cooling Module Plate

uxcell Aluminum Water Liquid Block Thermoelectric Cooling Module Plate

Feature

Description

M Shape Aluminum Water Block Thermoelectric Cooling Cooler Module.

7. uxcell TEC1-12709 Thermoelectric Cooler Heat Sink Cooling Peltier 12 Volt 82 Watt

uxcell TEC1-12709 Thermoelectric Cooler Heat Sink Cooling Peltier 12 Volt 82 Watt

Feature

Description

Size:TEC1-12709,12V 82W

Specifications:
Model: TEC1-12709
Voltage: 12V
Umax (V): 15.2V
Max Current (A): 9A
Cooling Power: Qcmax 82W
Resistance: 1.2-1.5Ω
△Tmax(Qc=0): up to 68°C
Operates Temperature: -55°C to 83°C
Power Cord: 29cm
Dimensions : 40mm x 40mm x 3.4mm (L*W*T)
Package Content: 1 x Thermoelectric Cooler

Description:
1.Get ice cold in minutes or heat to boiling by simply reversing the polarity.
2.Used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer / cooler.
3.Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
4.Must be used in conjunction with a heat sink to avoid burned. Hot side needs heat sink all the time.

Please Note:
1.Under cooling mode: Red wire to positive, black wire to negative. the surface with model number is cooling side.
2.When heating, just need to change the current polarity; when cooling, switching power supply is needed.
3.During installation, keep thermoelectric cooler clean, and apply the heat-conducting silicone grease evenly over both heating and cooling surfaces.

8. Uxcell Thermoelectric Cooling Module

Uxcell Thermoelectric Cooling Module

Feature

Description

Great for all kinds of electronic products and DIY project. It can be widely used in various mechanical to monitor the position of moving parts of machines and plant. Also it is very easy to use.

9. TEC1-04905 5.78V 16.6W Heatsink Thermoelectric Cooling Plate Module

TEC1-04905 5.78V 16.6W Heatsink Thermoelectric Cooling Plate Module

Feature

Description

  • Connected to a 5.78-volt power supply the cell will have a temperature differential between the two sides of about 65C (149F).
  • Note: Do not connect the cell to a power supply for more than a few seconds without a heat-sink on the hot side otherwise there will be internal overheating and destruction of the Peltier cell.

10. uxcell TEC1-02306 Thermoelectric Cooler Heat Sink Cooling Peltier 7V 13A

uxcell TEC1-02306 Thermoelectric Cooler Heat Sink Cooling Peltier 7V 13A

Feature

Description

Size:TEC1-02306

Description:
1.Get ice cold in minutes or heat to boiling by simply reversing the polarity.
2.Used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer / cooler.
3.Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
4.Must be used in conjunction with a heat sink to avoid burned. Hot side needs heat sink all the time.

Please Note:
1.Under cooling mode: Red wire to positive, black wire to negative. the surface with model number is cooling side.
2.When heating, just need to change the current polarity; when cooling, switching power supply is needed.
3.During installation, keep thermoelectric cooler clean, and apply the heat-conducting silicone grease evenly over both heating and cooling surfaces.

Specifications:
Model: TEC1-02306
Voltage: 7V
Max Current (A): 13A
Cooling Power: Qcmax 9.6W
Resistance: 0.33-0.38Ω
△Tmax(Qc=0): up to 66°C
Power Cord: 14cm
Dimensions : 15mm x 20mm x 3.2mm (L*W*T)

Package Content:
1 x Thermoelectric Cooler

Conclusion

By our suggestions above, we hope that you can found Thermoelectric Cooling Module Uxcell for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general